2, as shown below arrows around the main part of our main cleaning, we disinfectant to the inside, careful not too much, there will be corrosive effect, we generally use the bottle to buy the bottle of mineral water Cover, fitted with a cap can be, after the introduction of disinfectant, we use the cup to pour some clean water, so that the middle of the water soaked plastic rods, soak for about five minutes, and then we use a toothbrush to brush all around again.
3, after we went to the back of the fountain to find there is no screw as shown below, my family has two drinking fountains, other water dispenser may be only one, and my family may not the same, according to the actual machine to operate , We twist the screw, the plastic is easy to twist open, put them away, do not accidentally lost, and finally we have to wash up to go.
Water dispenser cleaning
4, the two screws twisted, you will find above there is a protective cover, we can directly to the protective buckle open, out, and then inside the water dispenser will be released. Water, or Tingzhi, caliber is also small, completely put the water inside or need a while.
Magic sponge can clean the water dispenser
5, so after the water put, we put these two light green protective suits, and then use cups of clean water inside the water dispenser, with a clean toothbrush and then brush around, then remove the protective cover, the inside Water, let us directly wash three times a row, a little older people can wash more times, this wash as many as possible this time, do not worry about wasting water, do not use water washing, to use the water to wash, It would not take half a bucket of water only, in order to health, a waste of this water is still worth, after washing our protective sleeve, screws are fitted, so you're done.